Hioki 3283-20 - Page 44

40
Checking Maximum, Minimum and Average Values (Recording Function – REC)
When [min] is displayed at the right end of the bar graph:
1 segment in the bar graph represents 1 minute. The segment
for the currently elapsing minute ashes, and when the minute
has elapsed, that segment stops ashing and lights steady. The
segments do this one after the other, starting from the left end of
the graph and going rightward. When all the bar graph's segments
are lighted steady, 30 minutes have elapsed. From then on, the
segments will once more ash one by one from left to right, to
indicate the elapsing minute, but this time the ashing segment will
go out with each minute that elapses.
When the segments to the left of the ashing segment
are lighted steady:
The number of steady-lighted segments
represents the elapsed time in minutes
(0 to 29).
The example shows the display for
elapsed time = 20 minutes.
When the segments to the right of the ashing segment
are lighted steady:
The number of segments that have
gone out represents the elapsed
time (+ 30) in minutes (30 to 59).
The example shows the display for
elapsed time = 50 minutes.
When [hour] is displayed at the right end of the bar graph:
1 segment in the bar graph represents
1 hour. Up to 59 hours of elapsed time
can be displayed.
The example shows the display for
elapsed time = 1 hour 40 minutes
.