Print
17
Print the measurement results.
Print
1. Print settings
Print Select
Set to [No].
* To select printing content
each time, select [Yes]
(Refer to below).
Print according to conditions set in the system screen printer sheet.
Displays the
[Printer] sheet
Use this sheet to set other detailed
settings related to the printer, such
as ink density.
Setting does not have to be carried
out every time.
When Execution Print Selection is set to [No],
waveform in this range will be printed.
Select [Whole Wave] or [A-B Wave].
2. Print
FEED key
Send paper. Use this to terminate the printing job or to
increase the space between printing jobs.
Pressing the PRINT key in the waveform screen will print the waveform
immediately.
1
Displays the
Waveform screen.
*In the case of [Print Select] is set to [Yes]
Press the PRINT key to display printing content selection GUI.
Select printing content.
Factory default is set to [Whole Wave].
Whole
Wave
: Print the whole waveform data
range.
A-B Wave : Print the range specified by the
AB cursor (AB cursor will not be
printed).
About Trig : Print 10 DIV worth of waveform
data from both sides of the trig-
ger position.
List : Print major setting items.
Report : Print the report.
Press the STOP key to terminate the printing job.
Print
2
To Next Page
Loading...