ABCSR key
Displays the A/B cursor settings
window.
START key
Starts measurements
The green LED at the upper is lit
during measurement.
Inner
: Jog
Outer: Shuttle
Scrolls waveforms
DISP key
Displays the Waveform screen.
STATUS key
Displays the Status screen.
FILE key
Displays the File screen.
F key
Select setting items
PRINT key
Prints waveforms
SAVE key
Saves data to storage media.
The LED to the right of the key lights up in blue.
ESC key
Cancels an operation.
Removes the displayed dialog and
window
CURSOR key
Moves the cursor up, down, left and
right on the screen.
KEY LOCK:
Press and hold the right and left
CURSOR keys for three seconds to
disable key operations.
To cancel key-lock, hold the keys
again for three seconds.
TRIG.SET key
Displays the trigger settings window
on the Waveform screen.
CH.SET key
Displays the channel settings window
on the Waveform screen.
SYSTEM key
Displays the System screen.
CHAN key
Displays the Channel screen.
Manual trigger key
Issues a manual trigger event.
WAVE key
Assigns the Jog & Shuttle knobs to
waveform scrolling.
FEED key
Feeds paper
COPY key
Prints a hard copy of the
display screen
HELP key
Opens help
information
AUTO key
Starts auto-range
measurement
STOP key
Stops measurements
1 press: Measurement stops after the
set recording length
2 presses:Immediate stop
Move the setting cursor to the item.
To change the setting content
Select
Settings cursor
The current cursor location is
indicated by flashing.
To Next Page
Loading...