Hioki BT3562 - Page 140

8.6 Message Reference
134
Set and Query the Averaging Function Setting
Syntax
Command
:CALCulate:AVERage:STATe <1, 0, ON or OFF>
Query
:CALCulate:AVERage:STATe?
Response <ON or OFF>
Example
Command
:CALC:AVER:STAT OFF
Query
:CALC:AVER:STAT?
Response
OFF
Set and Query the No. of samples to average
Syntax
Command
:CALCulate:AVERage <2 to 16>
Query
:CALCulate:AVERage?
Response <2 to 16 (NR1)>
Example
Command
:CALC:AVER 10
Query
:CALC:AVER?
Response
10
Set and Query the Comparator
Syntax
Command
:CALCulate:LIMit:STATe <1, 0, ON or OFF>
Query
:CALCulate:LIMit:STATe?
Response <ON or OFF>
Example
Command
:CALC:LIM:STAT ON
Query
:CALC:LIM:STAT?
Response
ON
Note
• When the Comparator function is enabled, auto-ranging is disabled.
• Switching the Comparator function on/off or changing its settings clears stored
measurement data (memory function).
HIOKI BT3562A981-09