Hioki BT3562 - 3.2 Basic Measurement Example

3.2 Basic Measurement Example
26
The following example describes the measurement process.
Example: Measuring resistance and voltage of a 30 m lithium-ion battery
3.2 Basic Measurement Example
Required items: Lithium-ion battery (30 m)
Test leads: Model 9770 PIN TYPE LEAD are used here.
Measurement
conditions:
Measurement mode.................. V (Resistance and Voltage measurement)
Range ....................................... 30 m
6 V
Sampling rage .......................... SLOW
Zero adjustment........................ Enabled
Preparations
1
Connect the power cord.
See "2.2 Connecting the Power Cord" (p.20).
2
Connect the test leads.
See "2.3 Connecting the Optional Test Leads" (p.21).
3
Turn the main power switch on.
See "2.4 Turning the Power On and Off" (p.22).
See "2.5 Selecting the Line Frequency" (p.24).
4
Cancel the standby state.
See "2.4 Turning the Power On and Off" (p.22).
3
1
Power ON
2
4
Black Lead
Red Lead
Example: Model 9770
HIOKI BT3562A981-09