Hioki BT3562 - 2.4 Turning the Power On and Off

1.4 Menu Display Sequence (SHIFT  ENTER)
16
Various auxiliary settings can be performed from the menu item displays.
1.4 Menu Display Sequence (SHIFT ENTER)
ERR Output Selection
display (p.84)
Zero-Adjustment Clear
display (p.35)
Interface Selection
display (p.105)
Self-Calibration setting
display (p.73)
Measurement Value Output
function setting display
(p.74)
Key Beeper setting
display (p.75)
Line Frequency set-
ting display
(p.24)
Measurement Current
Pulse Output
display(p.61)
(SHIFT Lamp lit)
The Menu display appears.
(Main Display)
The up/down RANGE key changes the setting
shown on the Sub Display.
Pressing this key returns to the
previous item display.
EOM-signal setup dis-
play (p.84)
Configuring the Absolute
Value Judgment display
(p.55)
Reset display
(p.76)
Settings on the menu item displays are applied and saved internally when
changed.
HIOKI BT3562A981-09