4.5 Statistical Calculation Functions
66
Automatic Clearing of Statistical Calculation Results after Printing
The instrument can be set to automatically clear statistical calculation results after results are output to the
printer.
1
The Statistical Calculation display appears.
2
(Press twice)
Bring up Auto Clearing After Printing in the Setup screen.
3
Turn Automatic Clearing After Printing on or off.
on.......... Automatically clears statistical calculation results after they are
output to the printer.
oFF........ Does not clear the results themselves.
4
Applies setting and returns to the Measurement display.
To cancel the settings:
SHIFT key
(Main Display)
(Sub Display)
(Sub Display)
Importing Data
Pressing the TRIG key while Statistical Calculation is ON executes one of the fol-
lowing operations:
• External Trigger: Takes one measurement and performs statistical calcu-
lation on the result
• Internal Trigger: Performs statistical calculation on the value displayed
immediately after pressing
• TRG command executes the same operation.
• Shorting the TRIG
terminal to the ISO_COM of the EXT I/O connector exe-
cutes the same operation.
Confirming Statistical Calculation Results
1
The Statistical Calculation display appears.
2
The indication on the display changes as follows with each
key-press.
To Next Page
Loading...
