21
Wireless Communications Function
5
Press the HOLD key.
The HID setting is toggled, and the instrument is automatically turned o.
If the HID function cannot be enabled
Use the rmware updating function of GENNECT Cross (ver. 1.8 or later) to update the Z3210.
IMPORTANT
To switch from the HID function to GENNECT Cross
If you start GENNECT Cross without canceling the paring between the mobile device and the
instrument, GENNECT Cross may not be able to recognize the instrument as a connectible
device. Follow the procedure below to reconnect the instrument to GENNECT Cross.
1. Use the Bluetooth
®
setting of your mobile device to delete the instrument.
2. Disable the Z3210’s HID function.
3. Use the Instrument Setting of GENNECT Cross to reconnect the instrument.
For detail information, please visit the Z3210’s website.
To Next Page
Loading...
