4
Making Measurements
Making Measurements
Video
Remarkable ease of use. Double your speed for checking leakage current on YouTube
Measurement procedure
1
Turn on the instrument.
The default setting of the range is AUTO. Every time you press the RANGE key, the range
switches.
Switch the range as required.
60.00 mA
AUTO
600.0 mA 6.000 A 60.00 A 600.0 A
2
Clamp the instrument around the object under measurement.
Wear appropriate protective gear such as gloves.
Clamp the instrument so that the object under measurement is located at the center of the jaws.
3
Read the measured value.
11
2
3
Press RANGE key for 1 s or more to switch between frequency measurement and
current measurement.
To Next Page
Loading...
