27
Using Test Leads
L9206 Test Lead
Plugs
Black
Red
Cables Metal pins
Barriers
Sleeves
Metal pin Connect to the object to be measured.
4 mm or less (sleeve attached)
19 mm or less (sleeve removed)
Diameter
approx. 2 mm
Sleeve Attach to the metal pins to prevent short circuit accidents.
Barrier Represents the safe handling distance from the metal pins.
During measurement, do not touch the area between
the barrier and the tip of the sleeve.
Plug Connect to the measurement terminals on this instrument.
Cable Double sheathed cables (Length: approx. 980 mm, Diameter:
approx. 3.5 mm)
When the white portion inside the cable is exposed,
replace with a new L9206 Test Lead.
To Next Page
Loading...
