41
Measuring Current
3.9 Measuring Current
DC/AC is measured. DC and AC are switched with the SHIFT key.
DANGER
• Do not input any voltage to the current
measurement terminals.
Doing so may result in short circuit accidents.
• To avoid electrical accidents, turn off the power to
the circuit before measuring and then connect the
test leads.
Measuring DC/AC
Function
• A Selected to measure 4000 A DC/AC or less.
• mA Selected to measure 400.0 mA DC/AC or less.
• A Selected to measure 10 A DC/AC or less.
When measuring an unknown current
Set to the high range.
To Next Page
Loading...
