26
Using Test Leads
2.3 Using Test Leads
The L9206 Test Leads supplied with the instrument are used for
measurements.
Depending on measurement locations, use our optional
measurement cables. For details on the optional items, see “Options
(sold separately)” (p. 2).
DANGER
To avoid electric shock, do not short circuit the line on
which voltage is applied at the tip of the test lead.
WARNING
•
To prevent a short circuit accident, be sure to use the test leads
with the sleeves attached when performing measurements in the
CAT III measurement category. (See “Measurement categories”
(p. 7))
• If the sleeves are inadvertently removed during measurement,
stop the measurement.
• When connecting the lead, use the correct voltage measurement
terminal (V terminal) and current measurement terminal (A
terminal). If an incorrectly connected lead is used, the instrument
may be damaged or short circuit accidents may occur.
• Use only test leads and optional equipment specifi ed by our
company.
CAUTION
• To ensure safe operation, use only test leads specifi ed
by our company.
• When carrying out measurements with the sleeves in
place, be careful to avoid damaging the sleeves.
• The tips of the metal pins are sharp and may cause
injury. Do not touch the tips.
To Next Page
Loading...
