10
Usage Notes
IMPORTANT
Use only the specied measurement cables or test leads. Using a
non-specied cable may prevent safe measurement.
Use environment of the instrument
See “3.1 General Specications” (p. 45) about the operating
temperature and humidity.
CAUTION
• Installing the instrument in inappropriate locations may
cause a malfunction of instrument or may give rise to an
accident. Avoid the following locations:
• Exposed to direct sunlight or high temperature
• Exposed to corrosive or combustible gases
• Exposed to a strong electromagnetic eld or
electrostatic charge
• Near induction heating systems (such as high-
frequency induction heating systems and IH cooking
equipment)
• Susceptible to vibration
• Exposed to water, oil, chemicals, or solvents
• Exposed to high humidity or condensation
• Exposed to high quantities of dust particles
• To avoid damage to the instrument, protect it from
physical shock when transporting and handling. Be
especially careful to avoid physical shock from dropping.
• Do not place the instrument on an unstable table
or an inclined place. Dropping or knocking down
the instrument can cause injury or damage to the
instrument.
To Next Page
Loading...
