Hioki FT3151 - Usage Notes

9
Usage Notes
Usage Notes
Verifying before usage
Before using the instrument, verify that it operates normally to
ensure that no damage occurred during storage or shipping. If
you nd any damage, contact your authorized Hioki distributor or
reseller.
DANGER
Before using the instrument, check that the coating
of the test leads and cables are neither ripped nor
torn and that no metal parts are exposed. Using the
instrument under such conditions could result in an
electric shock. Replace the test leads and cables with
those specied by our company.
WARNING
Do not short-circuit between two lines to be measured
with the metal parts of the test leads. Doing so could
result in a serious accident such as a generation of
arc.
To avoid an electric shock, do not touch the metal
parts of the test leads.
Do not use the instrument with circuits that exceed
its ratings or specications. Doing so may cause it to
become hot, resulting in an electric shock.
To avoid an electric shock, be careful to avoid
shorting live lines with the test leads.