52
Inserting/Replacing Batteries
4.2 Inserting/Replacing Batteries
Before using the instrument rst time, insert 6 LR6 alkaline batteries.
Before measurements, check that the battery level is sufcient.
When the battery charge is low, replace the batteries.
WARNING
• To avoid an electric shock, turn off the power
and disconnect the cables and test leads before
replacing the batteries.
• To prevent instrument damage or an electric shock,
use only the screws for securing the battery cover
in place that shipped with the product.
If you have lost any screws or nd that any screws
are damaged, please contact your authorized Hioki
distributor or reseller for a replacement.
• Battery may explode if mistreated. Do not short-
circuit, disassemble or dispose of in re. Do not
recharge alkaline batteries. Handle and dispose of
batteries in accordance with local regulations.
• After replacing the batteries, replace the cover and
secure the screws before using the instrument.
To Next Page
Loading...
