3.1 Overview of Communication
22
Printer can be connected to enable printing measurement values and screens.
Command control using the TCP/IP protocol is possible.
You can control the instrument with communication commands from a computer via the USB and LAN inter-
faces.
There are the following two communication methods. To enable communication, the communication condi-
tions need to be set on the instrument.
The instrument is communication class compatible.
Command control using the TCP/IP protocol is possible.
IM3523A
RS-232C communication (when connected to the Z3001) (p. 27)
LAN communication (when connected to the Z3002) (p. 30)
USB communication (p. 23)
LAN communication (p. 30)
To Next Page
Loading...
Need help?
General
