Hioki IR4051 - Page 19

1.3 Names and Functions of Parts
16
Display
Bar graph
Measured
value
Comparator judgment reference value
or 1-minute value
IR4052
Indicates the remaining battery life as one of three
levels. The battery mark outline will flash when the
remaining battery life reaches 0, at which point the
instrument will no longer perform measurement.
Turns on when the voltage measured with the V
range is DC.
Turns on when the voltage measured with the V
range is AC.
Flashes when the measured value is less than the
minimum display value.
Flashes when the measured value is greater than the
maximum display value.
Lights up when the measured value is held.
Turns on when the comparator judgment is PASS
(good).
See: “2.4.1 Setting the Comparator” (p.25)
Turns on when the comparator judgment is FAIL
(defective).
See: “2.4.1 Setting the Comparator” (p.25)
Flashes when a dangerous voltage exists between
the measurement terminals.
HIOKI IR4051A981-09