Safety Information
This instrument is designed to conform to IEC 61010 Safety
Standards, and has been thoroughly tested for safety prior to
shipment. However, using the instrument in a way not described
in this manual may negate the provided safety features.
Before using the instrument, be certain to carefully read the fol-
lowing safety notes.
Safety Information
Mishandling during use could result in injury or death, as
well as damage to the instrument. Be certain that you
understand the instructions and precautions in the man-
ual before use.
• With regard to the electricity supply, there are risks of
electric shock, heat generation, fire, and arc discharge
due to short circuits. If persons unfamiliar with electric-
ity measuring instrument are to use the instrument,
another person familiar with such instruments must
supervise operations.
• Protective gear
This instrument is measured on a live line. To avoid
electric shock when measuring live lines, wear appro-
priate protective gear, such as insulated rubber gloves,
boots and a safety helmet.
To Next Page
Loading...
