4.3 Cleaning
• To clean the instrument, wipe it gently with a soft cloth
moistened with water or mild detergent. Never use solvents
such as benzene, alcohol, acetone, ether, ketones, thinners or
gasoline, as they can deform and discolor the case.
• Wipe the LCD gently with a soft, dry cloth.
Back of the instrument
Screw
Battery cover
fusebatteries
1.
Turn the rotary selector to OFF and remove the test lead
from the instrument as a precaution.
2.
Loosen the central fastening screw at the back of the
instrument and remove the battery cover.
3.
Replace all four batteries or the fuse.
4.
Slide the
battery
cover back into place and tighten the
screw.
4.3 Cleaning
To Next Page
Loading...
