Hirschmann iVISOR mentor QVGA - Status Displays

Displays and controls
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 14
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
3.3 Status displays
If required, various symbols are displayed in the “status area” of the data display (1).
Some of the symbols flash depending on the operating status.
LMI error in combination with a code (refer to error code list)
Constant: radius monitoring active Flashing: limit reached or exceeded.
Constant: height monitoring active Flashing: limit reached or exceeded.
Constant: boom angle monitoring active Flashing: limit reached or exceeded.
Constant: slew angle monitoring active Flashing: limit reached or exceeded.
Constant: virtual wall monitoring active Flashing: limit reached or exceeded.