Configuration Setup
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 20
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
4.2 Quick adjusting the reeving
It is necessary to program the system by entering the respective number of reevings each time the
rope reeving arrangement is modified.
Calling up the function:
Actuate "SEL" key
The system will temporarily interrupt the movements of the crane during the
setup procedure.
• Start setup procedure
Note: Start of setup reeving procedure is not possible with man masket
operation!
Setup reeving
START configuration setup procedure
OK, only if all entries are correct
The entering of the mode of operation code is completed after this confirmation,
and the normal operation screen is displayed.
• Select reeving:
(not with man basket operation)
Increase value
Decrease value
Confirm reeving
To Next Page
Loading...
