Configuration Setup
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 19
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
• Select outrigger position:
(not with man basket operation)
1=max 2=mid 3=min 4=on rubbers
Cursor to next position
Cursor to previous position
Confirm selection, go to next step
• Select reeving:
(not with man basket operation)
Increase value
Decrease value
Confirm reeving, go to next step
• Confirm inputs:
In this menu screen (example), the operator is prompted to confirm the entries once again.
Please check the displayed values before confirming them!
Discard settings and renew setup procedure
OK, only if all entries are correct
The setup procedure is completed after confirmation.
The normal operation screen is displayed.
To Next Page
Loading...
