Configuration Setup
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 18
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
• Select working area:
1=over front 2=360°
Cursor to next position
Cursor to previous position
Confirm selection, go to next step
• Select hoist:
1=main hoist 2=auxiliary hoist
Cursor to next position
Cursor to previous position
Confirm selection, go to next step
• Select boom with or without stowed jib:
(not with man basket operation)
1=main boom 2=man boom with stowed jib
Cursor to next position
Cursor to previous position
Confirm selection, go to next step
To Next Page
Loading...
