Hirschmann iVISOR mentor QVGA - Tip height monitoring

Working area definition
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 25
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
4.4.1 Radius monitoring
Programmable function to monitor the
minimum and / or maximum boom
radius
Calling up the function
Overview menu with symbols appears, with any previously programmed
limits.
edit radius limit
edit height limit
edit boom angle limit
Go to next key level
save current boom radius as minimum limit
(the last saved value for the min. boom radius is displayed)
switch monitoring of minimum boom radius on / off
(having switched on, the relevant symbol appears near the limit value and in the
status display)
jump to settings of maximum boom radius
back to limits main menu
save current boom radius as minimum limit
(the last saved value for the min. boom radius is displayed)
switch monitoring of minimum boom radius on / off
(having switched on, the relevant symbol appears near the limit value and in the
status display)
jump to settings of maximum boom radius
back to limits main menu
The settings for programming the maximum boom radius are similar.