Working area definition
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 31
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
set a point in the working area to start a wall
(having pressed SET, the point is marked by" X")
delete existing walls
back to limits main menu
move the boom tip to an other point of the imaginary wall… and
set the second point in the working area
to create a virtual wall
delete existing walls
back to limits main menu
allows for further walls to be added (up to 5 virtual walls)
delete existing walls
back to limits main menu
< example with 3 virtual walls
To Next Page
Loading...
