Displays and controls
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 8
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
(1) Data display
The Data display (1) is dot matrix LC display with background illumination and extended temperature
range, on which essential data are displayed depending on the operating mode, such as load values,
geometry and crane data, symbols etc. The design enables good legibility even in bright sunlight,
and at night too thanks to the integrated background lighting.
Examples of display menus
(values are not real)
Start after system test Display, normal operation Entry to Info menu
Display of LMI values Entry menu – working area definition
Service menu (code-protected)
Pressure sensor adjustment
You can find a detailed description of symbols and displays in the chapters and the appendix of this manual.
To Next Page
Loading...
