Traffic control
134
8.3
Rate Limiter
Basic - L3P
Release
3.1
06/07
Setting options per port:
D Ingress Limiter Rate for the packet type(s) selected in the Ingress
Limiter frame:
D = 0, no ingress limit at this port.
D > 0, maximum inbound traffic rate (in kbit/s) that is allowed to be
received by and forwarded from this port.
D Egress Limiter for broadcast packets:
D = 0, no rate limit for outbound broadcast packets at this port.
D > 0, maximum rate limit for outbound broadcast packets sent at
this port.
Fig. 36: Load limiter for MACH 4000 and Power MICE
To Next Page
Loading...
Need help?
General
