Access to the user interfaces
24
1.3
Web based Interface
Basic - L3P
Release
3.1
06/07
V The password “public”, with which you have read permission, appears
in the password field. If you wish to access the Switch with write per
-
mission, then highlight the contents of the password field and overwri-
te it with the password “private” (state on delivery). Changing the
password protects the Switch against unauthorized access.
V Click on OK.
The Website of the Switch appears on the screen.
Note: The changes you make in the dialogs are taken over by the Switch
when you click on “Write”. Click on “Load” to update the display.
Note: You can block your access to the Switch by entering an incorrect
configuration.
Activating the function “Cancel configuration change” in the “Load/Save”
dialog enables you to return automatically to the last configuration after
a
set time period has elapsed. This gives you back your access to the
Switch.
To Next Page
Loading...
