Entering the IP parameters
26
Basic - L3P
Release
3.1
06/07
D Using DHCP Option 82.
Choose this “in-band” method if you want to configure the installed Switch
using DHCP Option 82. You need a DHCP server with Option 82 for this.
The DHCP server assigns the configuration data to the Switch using its
physical connection (see
“System Configuration via DHCP Option 82” on
page 46).
If the Switch already has an IP address and can be reached via the network,
then the Web-based interface provides you with another option for configuring
the IP parameters.
To Next Page
Loading...
