Loading Software Updates
Basic - L3P
Release
3.1
06/07
4.2
Loading the Software from the tftp Server
67
V After the loading procedure has been completed successfully, activa-
te the new software as follows:
Select the Basics:Restart dialog und and perform a cold start.
V After booting the switch, click “Reload” in your browser to re-enable
your access to the Switch.
enable
copy tftp://10.0.1.159/
rsL2E.bin system:image
Switch to the Privileged EXEC mode.
Transfer the software file „rsL2E.bin” from the tftp
server with the IP address 10.0.1.159 to the
Switch.
To Next Page
Loading...
Need help?
General
