Installation RSPE30/32/35/37
Release
16
04/2019
27
1.4 Power supply
You will find information on the characteristic values here:
“Device name and product code” on page 21
1.4.1 Supply voltage with the characteristic value K9
The following options for power supply are available:
1 × 3-pin terminal block
You will find information on connecting the supply voltage here:
See “Supply voltage with the characteristic value K9” on page 42.
1.4.2 Supply voltage with the characteristic value KK
The following options for redundant power supply are available:
2 × 3-pin terminal block
You will find information on connecting the supply voltage here:
See “Supply voltage with the characteristic value KK” on page 43.
1.4.3 Supply voltage with the characteristic value CC
The following options for redundant power supply are available:
2 × 2-pin terminal block
You will find information on connecting the supply voltage here:
See “Supply voltage with the characteristic value CC” on page 45.
1.4.4 Supply voltage with the characteristic value PP
The following options for redundant power supply are available:
2 × 2-pin terminal block
You will find information on connecting the supply voltage here:
See “Supply voltage with the characteristic value PP” on page 46.
These device variants support PoE(+).
Ensure that the external power supply unit you use to provide the PoE
voltage fulfills the insulation requirements according to IEEE 802.3
(insulation resistance 48 V DC, output to the “rest of the world” 750 V DC
for 60 seconds).
To Next Page
Loading...
