4
Installation RSPE30/32/35/37
Release
16
04/2019
2.3 Mounting a cover panel or a media module 39
2.3.1 Mounting a cover panel 39
2.3.2 Mounting a media module 39
2.4 Installing and grounding the device 39
2.4.1 Installing the device onto the DIN rail 40
2.4.2 Grounding the device 41
2.5 Installing an SFP transceiver (optional) 41
2.6 Connecting the terminal blocks 42
2.6.1 Supply voltage with the characteristic value K9 42
2.6.2 Supply voltage with the characteristic value KK 43
2.6.3 Supply voltage with the characteristic value CC 45
2.6.4 Supply voltage with the characteristic value PP 46
2.6.5 Signal contact 47
2.7 Operating the device 48
2.8 Connecting data cables 48
2.9 Filling out the inscription label 49
3 Making basic settings 50
4 Monitoring the ambient air temperature 51
5 Maintenance and service 52
6Disassembly 53
6.1 Removing the device 53
6.2 Removing an SFP transceiver (optional) 54
6.3 Removing a media module (optional) 54
7 Technical data 55
7.1 General technical data 55
7.2 Dimension drawings 59
7.3 EMC and immunity 61
7.4 Network range 64
7.5 Power consumption/power output 68
7.6 Scope of delivery, order numbers and accessories 68
To Next Page
Loading...
Need help?
General
