Installation RSPE30/32/35/37
Release
16
04/2019
69
Accessories
Note that products recommended as accessories may have different
characteristics to those of the device, which may limit the application
range of the overall system. For example, if you add an accessory with
IP20 to a device with IP65, the degree of protection of the overall system
is reduced to IP20.
Name Order number
Terminal cable 943 301-001
Network management software Industrial HiVision 943 156-xxx
For device variants featuring supply voltage with characteristic
value K9 or KK:
3-pin terminal block for supply voltage (50 pieces)
943 845-008
For device variants featuring supply voltage with characteristic
value CC or PP:
2-pin terminal block (50 pieces) for supply voltage
943 845-009
2-pin terminal block for signal contact (50 pieces) 943 845-010
Power Cord 942 000-001
Protection cap for RJ45 socket (50 pieces) 943 936-001
Protection cap for SFP slot (25 pieces) 943 942-001
Cover panel for unused module slot 942-131-001
AutoConfiguration Adapter ACA31 942 074-001
AutoConfiguration Adapter ACA21-USB (EEC) 943 271-003
AutoConfiguration Adapter ACA22-USB (EEC) 942 124-001
Gigabit Ethernet SFP transceiver Order number
M-SFP-TX/RJ45 943 977-001
M-SFP-TX/RJ45 EEC 942 161-001
The following operating conditions apply to twisted pair transceivers:
Longer RSTP switching times and link loss detection times compared to twisted pair ports
provided by the device directly.
Not applicable for combo and Fast Ethernet ports.
Exclusively supports the autonegotiation mode including autocrossing.
M-SFP-SX/LC 943 014-001
M-SFP-SX/LC EEC 943 896-001
M-SFP-MX/LC EEC 942 108-001
M-SFP-LX/LC 943 015-001
M-SFP-LX/LC EEC 943 897-001
M-SFP-LX+/LC 942 023-001
M-SFP-LX+/ LC EEC 942 024-001
M-SFP-LH/LC 943 042-001
M-SFP-LH/LC EEC 943 898-001
M-SFP-LH+/LC 943 049-001
M-SFP-LH+/LC EEC 942 119-001
SFP-GIG-LX/LC
a
a. You will find further information on certifications on the Internet on the Hirschmann product
pages (www.hirschmann.com).
942 196-001
SFP-GIG-LX/LC EEC
a
942 196-002