Settings Overview
• Total Volume
Maintain a consistent loudness level for a wide dynamic range of programmes, loud commercials and
channel or input changes.
This function may not be applicable in some models/countries/regions.
• Equalizer
Boost the volume at different frequencies.
This function is only applicable when TV Speakers is selected at > Settings > Sound > Audio
Output Settings > Audio Output.
• Subwoofer
Enable / Disable internal subwoofer.
This function may not be applicable in some models/countries/regions.
• Mounting Position
Automatically optimise the sound based on the position of the TV.
This function may not be applicable in some models/countries/regions.
• Auto Volume Control
Activate to prevent the volume from changing when switching TV channels.
This function may not be applicable in some models/countries/regions.
• Reset Audio Settings
Restore all of the audio settings in the current audio mode to the factory default values.
Note:
• Some models may not support decoding of DTS CD bitstreams. Playback of this format may produce
undesirable noise.
Related information
Sound Issues on page 59
Select Speakers
> Settings > Sound > Audio Output Settings
Adjust the settings of speakers.
Audio Output
Select the speakers which you want to use.
Digital Audio Out
Select the digital audio output format that best suits the audio device type.
• Auto: the audio device automatically outputs in a supported format.
• Pass Through: the audio device outputs without any processing.
• PCM: the audio device outputs PCM (pulse code modulation) format.
• Dolby Audio - Dolby Digital: the audio device outputs Dolby Digital audio when connected to the TV via
the optical port.
• Dolby Audio - Dolby Digital Plus: the audio device outputs Dolby Digital Plus audio when connected to
the TV via the HDMI (ARC) port.
36
To Next Page
Loading...
Need help?
General
