3. Select the content with VOL +/- button on the
remote control, and then press
to confirm
your selection and exit the settings.
• Repeating these steps will toggle the feature
"ON" and "OFF".
6.3 Select Modes
• Press the (SOURCE) button repeatedly on
the unit or on the remote control to select
the HDMI eARC/HDMI ARC, HDMI IN, OPTICAL,,
• Press the
button on the remote control to
select the BT (Bluetooth) mode.
• The selected mode will show on the display.
6.4 Adjust the Bass/Treble Level
• Press the BASS +/- buttons on the remote
control to adjust bass level (bass +5 / bass -5).
• Press the TREBLE +/- buttons on the remote
control to adjust treble level (treble +5 /
treble -5).
6.5 Turn the Surround Sound ON/OFF
• Press the SURR button on the remote control
to turn on the surround sound. Press this
6.6 Adjust the Soundbar’s Volume
• Press the + / - buttons on the unit or the VOL+
/ VOL- buttons on the remote control to adjust
the volume.
•
•
If you wish to turn the sound off, press the
(MUTE) button on the remote control.
Press the
(MUTE) button again or press
the VOL+ / VOL- buttons to resume normal
listening.
6.7 Adjust the Surround’s Volume
1 When the surround speaker is connected,
press and hold the SURR button for 3
seconds, the display shows “SUR-0”
2 Then press VOL+ / VOL- buttons to increase
or decrease the surround speaker volume
(SUR +5~SUR -5).
• After about 3 seconds, the unit will exit from
surround volume setting. The display will show
the current selected mode. You may now press
the VOL+ / - buttons to adjust volume.
6.8 Adjust the Brightness
- Press the DIMMER +/- button on the remote
control to select brightness level.
6.9
• While playing, press the EQ button on the
remote control to select desired preset
equalizers: MUSIC, MOVIE, NEWS, SPORT,
NIGHT, GAME, AI EQ.
6.10 Set the Audio Delay (AV SYNC)
• Video image processing, sometimes longer
than the time required to process the audio
signal. This is called “delayed.” Audio Delay
feature is designed to remedy this delay.
• Set the audio delay, provided only for the
current playback mode. (As provided in
the HDMI ARC audio delay mode, the delay
mode is valid only for the HDMI ARC).
- By default, the audio delay is set to 00.
1. During ON mode, press and hold the
button for 3 seconds to open the menu, then
press
the button 9 times in succession.
The unit’s display will scroll “ LT 00”.
2. Press the VOL+/- buttons to initiate a 10 ms
frequency hopping to adjust the delay time.
Set 200 ms maximum delay.
3. Press the
button or wait 10 seconds to exit.
Tips:
• Adjustment range: [00~200ms]
• The audio delay setting is only valid for
digital audio (eg, HDMI IN, HDMI ARC,
HDMI eARC, OPTICAL).
15
AUX, USB, BT(Bluetooh) mode.
Display Mode
HDMI eARC
HDMI ARC
HDMI IN
OPTICAL
Bluetooth
Connected
Not Connected
AUX
USB
No USB connected
No Music Or No File
Supported
In USB mode, press button or
to resume normal listening.
In BT mode, only press VOL+/VOL-
buttons on the connected phone can
resume normal listening.
/
To Next Page
Loading...
Need help?
General
Weight and Dimensions
