13
2. Door removal
In case your home access door is too
narrow for the refrigerator to pass through,
remove the refrigerator doors and drawers
by the following instructions.
Tools you will need (Not provided):
Allen Wrench (4mm)
Wrench (8mm)
Philips Screwdriver
2.1 Disassembling the fridge door
Some models may be slightly different
from pictures. If some parts shown in the
picture cannot be found in your appliance,
please ignore the relevant description.
1. With the door closed, remove the 3
screws holding the top cover (A) with
Philips (+) screwdriver, and then remove
the top cover with the entire-harness
attached.
2. Remove the 3 screws (B) fixed on the
hinges with a wrench (8mm) and 1 ground
screws (C) attached to the hinge with
Philips (+) screwdriver. Remove the upper
left and right door hinges (D).
3. Use your both hands to open the door
more than 90°.Lift it up and take it off.
4. Remove the 4 hex head bolts hinges (E)
with an Allen wrench (4 mm).Remove the
lower left and right door hinges (F).
Re-attaching the fridge doors
To reattach the fridge doors after you have
moved the appliance to its final location,
assemble the parts in reverse order.
Caution!
In case the fridge doors can’t be
self-closed, please make sure the door
opened more than 90
°
when you remove
or re-attaching the fridge doors.
2.2 Disassembling the freezer door
To Next Page
Loading...
