EasyManua.ls Logo

Hisense HSAA16FS - Greener Dishwashing; Save Energy and Water

Hisense HSAA16FS
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
1h 65° program with the
The dishwashing program is designed for an effective wash using as little energy and water as possible.
Do not exceed the permitted water supply temperature. Certain materials used in some cookware
cannot withstand high heat. See Fragile dishes in the chapter Loading the dishwasher.
Greener dishwashing
When using a dishwasher in a residential setting, less energy and water are generally used compared
to washing the dishes by hand.
Save energy and water
Save energy and water by waiting until the dishwasher is full before running a program (see number
of standard place settings). Use the
Read the environmental declaration on the packaging!
Too much detergent and rinse aid
Choose a green detergent
Do not rinse the dishes under running water as this will lead to increased energy and water consumption.
Simply scrape off large food particles before loading the dishwasher.
Speed+ option to rinse the
This program is suitable for washing normally soiled dishes and is the most effective program in terms
of combined energy and water consumption.
If the dishes are only slightly dirty, you can select a program with a low temperature.
Connect the dishwasher to the hot water supply (max. 60 °C) if the building is heated using an
energy-efficient means such as district heating, solar power or geothermal power. Choosing a hot
water connection reduces the dishwasher's energy consumption.
NOTE!
Connect the dishwasher to the cold water supply if the building is heated using oil, electricity or gas.
The program washes at a low temperature for a long time.
Select option - Smart Dry
A better drying result is achieved if you use the Smart Dry option, which automatically opens the
dishes if there are any unpleasant odours.
dishwasher door. Wait until the dishwasher indicates that the program has ended and the dishes
have cooled before unloading the dishwasher. (If the dishwasher is built-in, the surrounding furnishing
must be resistant to any condensation from the dishwasher.)
Do not rinse under running water
Run a fully loaded dishwasher
Run programs at a lower temperature
Select dishwashing program - Eco 45°
Connect to cold water
Connection to hot water supply
can result in less effective dishwashing and also entail greater
environmental impact.

Related product manuals