To facilitate cleaning you can remove the spray arms. Remember to fit them firmly back into place
afterwards.
Holes and bearings can sometimes become blocked. Remove any debris using a pin or the like. The
spray arms also have holes underneath.
• Pull out the top cutlery tray. Unscrew the top spray arm bearings anticlockwise to remove the
spray arm.
• Pull out the upper basket.
• Unscrew the spray arm bearings anticlockwise to remove the spray arm from the upper basket.
24
Check that the yellow
drainage pump stop on the
right in the bottom drain is in
place.
NOTE!
Dishwashing results may be affected if the filter is fitted incorrectly. The dishwasher must not be
used without the filter in place!
Upper spray arm
Top spray arm
Cleaning the spray arms
To Next Page
Loading...
