Hisense HSAA16FS - Settings

Settings
Confirm / Next setting
Select alternative
Open the dishwasher's settings menu
Settings Alternatives
A beep confirms that the control panel has been pressed.2 Sounds 00 - 03
A beep indicates when a dishwashing program has
ended.
Error messages are always indicated by a loud buzzer.
3 Rinse aid 00 - 05 Setting for rinse aid dosage. The rinse aid dispenser can
be adjusted between 00 (Off) and 05 (High dosage).
Increase the rinse aid dosage:
• If the dishes have water marks.
Decrease the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft water, the
rinse aid can be diluted 50:50 with water.
Pre-selected at factory: 03
1. Press
.
2. To open the dishwasher's settings menu, press and hold
and
3. Press
to step through the setting menu.
6. To exit the menu, step through it or pressing .
until SEt is shown on the
display.
4. Press to step through the alternatives .
5. Confirm the selected setting by pressing .
21