Network symbol on the display
The dishwasher is ready to be connected to your wireless network or
paired with your smartphone/tablet.
Flashing 0.25 sec on/off
The dishwasher is connecting to your wireless network.Flashing 0.5 sec on/off
The dishwasher is connected to your wireless network and the cloud.Glows
Remote control the dishwasher
The dishwasher’s network symbol is shown on the display when the dishwasher is paired with a
smartphone/tablet. You can use the ConnectLife app to monitor the dishwasher and change settings.
Remote start the dishwasher
To remote start the dishwasher, close the door and press , then press . APP will flash on the
dishwasher display.
In the ConnectLife app, select and start a program. The remaining time will appear on the dishwasher
display when a program is remote started.
If the door is not closed within
5
minutes, the machine switches off.
Pair more devices
Pair more devices/users with the dishwasher.
• Open the ConnectLife app and log in to your account or register a new account.
• Go to Appliances. Click on Add appliances or the + button. Select Home appliances.
• Scan the dishwasher serial number code (see the serial number plate). Follow the further
instructions in the app.
•
Press on the dishwasher.
•
Deactivate/activate WiFi connection
After connecting the dishwasher to your local network, you can deactivate the WiFi connection. You
can then reactivate the WiFi connection to reconnect to the same network.
•
•
On the dishwasher display: Briefly press to reactivate the WiFi connection. On appears on the
display.
Remove devices
Remove all connected devices/users.
•
On the dishwasher display: Press and hold until the buzzer sounds six times, P appears on the
20
On the dishwasher display: Press and hold until the buzzer sounds six times to start
connecting. P appears on
the display, then release , after which the display starts counting
down.
On the dishwasher display: Press and hold until the buzzer sounds nine times to deactivate the
WiFi connection. Off appears on
the display.
display then release . When the display starts counting down, press and hold again, UnP
appears on the display after the buzzer sounds three times.
To Next Page
Loading...
