Stopping or changing a program
Open the door and top up with new detergent if the lid of the detergent dispenser has opened. Close
the door. Then select a new program and press .
Remaining time
Press to pause the program. Open the door. Add the dishes and close the door. Press .
Power failure
program continues when power is restored. If the power is cut during drying, the program is interrupted.
Once you have chosen a program and options, the total time is displayed.
Once the program has finished, "End" appears on the display. And the dishwasher turns off after the
The dishwasher switches off automatically after the program ends. Shut off the water tap after each
use.
buzzer makes a sound.
Press to pause the program. If you want to interrupt or change the program after starting the
dishwasher, press and hold for three seconds.
• Fully load the dishwasher.
• Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important
for plastic items.
• Top up with rinse aid or increase the rinse aid dosage setting.
• Activate the Smart D ry option.
Hot porcelain is more fragile. Leave the dishes to cool in the dishwasher before unloading them.
Unload the lower basket first to avoid any water drops from the upper basket falling onto the dishes
in the lower basket.
1)
You should not load more dishes if the lid of the detergent dispenser has been opened.
If the dishwasher is turned off due to a power failure when a dishwashing program is running, the
Check washing times
When the dishwasher is turned on, press and hold and , and the screen will display the number
of times the dishwasher has been washed. Release the button to exit.
• Allow the dishes to cool before unloading the dishwasher.
17
Unloading the dishwasher
The best drying results
Once the program has finished
If you want to load more dishes
1)
To Next Page
Loading...
