EasyManua.ls Logo

Hisense HSAA16FS - Installation; Safety Instructions; Transport Protection for the Door; Placing the Dishwasher

Hisense HSAA16FS
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation
Nominal dimensions. Actual measurements may vary.
Safety instructions
The plug must be disconnected or power to the socket turned off while the work is carried out!
Do not forget to remove the transport protection for the door when unpacking the dishwasher.
Transport protection for the door
The dishwasher can be installed under a worktop or freestanding. Make sure the area on which the
dishwasher is to be installed is firm.
Placing the dishwasher
[mm]
845-885
90
50 50
597
599
114
718
32
WARNING!
Turn off the water supply when installing the dishwasher!
none of the connections leak.
Connections to electricity, water and drainage must be performed by a qualified professional.
Always follow applicable regulations for water, drainage and electricity.
Take care during installation! Wear protective gloves! There must always be two people!
Place a drip tray on the floor beneath the dishwasher to prevent damage from any water leaks.
Before screwing the dishwasher into place, test the dishwasher by running the 1h 65° program
with the Speed+
option. Check that the dishwasher fills with water and drains. Check also that

Related product manuals