Settings Alternatives
This setting reduces the rinse aid dose.
Pre-selected at factory: 00
.
To exit the dishwasher's settings menu, select End and
press or wait for three seconds.
End Exit
TAB 00 (Off) Activate this setting when using an all-in-one detergent
01 (On) that contains rinse aid.
5
F--
When contacting the service department, you may be
asked to provide the most recent error messages.
rSt Restore factory defaults Restores all settings to the factory defaults.
Select rSt and press
Error readout
Any error messages.
22
To Next Page
Loading...
