To Next PageTo Next PageHow to fix Hitachi LCD TV with no picture and sound?
If your Hitachi LCD TV shows no picture and no sound, first, ensure the TV is switched on and properly connected to the mains power outlet. Then, select the appropriate input mode. If the problem persists, unplug the unit for one minute, and then plug it back in.
What to do if my Hitachi LCD TV has no reception?
If your Hitachi LCD TV isn't receiving a signal, ensure you've tuned in the TV stations by pressing '1' on the remote control. Check the antenna connection and make sure the TV is ON and not in standby mode.
Why is my Hitachi 22LD5550U LCD TV image blocky or stopping intermittently?
If you are seeing a blocky image or intermittent stops on your Hitachi LCD TV, check all antenna connections. Try moving the antenna away from potential sources of interference. You might also want to try using an antenna booster.
Why does my Hitachi 22LD5550U LCD TV switch off when the antenna signal is missing?
The Hitachi LCD TV switches off after the antenna signal disappears because, after 15 minutes without an antenna signal, it will automatically enter standby mode. This is normal operation.
What to do if my Hitachi LCD TV shows “Database empty”?
If your Hitachi LCD TV displays a “Database empty” message, verify all antenna connections and then try the auto tuning process again.
Why can't I select the TUNING option on my Hitachi LCD TV?
If the TUNING option is grayed out in the menu of your Hitachi LCD TV, it means the unit is set to AV mode. To resolve this, press '1' on the remote control.
General| Screen Size | 22 inches |
|---|---|
| Display Type | LCD |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 1000:1 |
| Brightness | 250 cd/m² |
| Inputs | HDMI, VGA, Component, Composite, RF |
Includes warnings on headphone use, battery disposal, and DVB-T information.
Essential safety guidelines for operating the television correctly.
Advice on preventing hazards from liquids, heat, and placement.
Safety measures for moving, placing, and securing the TV unit.
Step-by-step guide for installing and removing the TV stand.
Identifies buttons and indicators directly on the television unit.
Explains the function of the remote receiver and the standby/operation LED.
Details each button on the remote and its corresponding function.
Instructions for installing the correct batteries in the remote.
Guide for connecting the aerial to the TV.
Details all input/output ports located on the back of the TV.
Steps for automatic installation, language, and country selection.
Setting the on-screen and preferred audio languages.
Steps for connecting a computer and setting the input mode.
Instructions for connecting HDMI or DVI sources.
A table of problems and their solutions.
Detailed technical data for the TV models.
Initial steps for connecting the TV to power and an antenna.
A summary of the auto setup process.
Setting the preferred language for menus and on-screen text.
Detailed steps for performing automatic channel tuning.
