Hitachi 3100

Configuring LDAP servers
Before using LDAP
, it is necessary to enable LDAP for the HNAS server.
To use LDAP, navigate to Network Configuration > NIS/LDAP
Configuration and click Enable LDAP.
The current LDAP configuration settings appear as shown in the following
example:
This page contains the following options:
• Modify - this option enables the Administr
ator to change the LDAP
configuration settings
• Add - this option enables the Administrator to add a new LDAP server
• Delete - this option enables the Administrator to remove an existing LDAP
server
• Switch to using NIS - this option enables NIS only mode and displays
the NIS configuration settings
• Disable NIS and LDAP - this option disables NIS and LDAP
CLI commands
Configuring name and directory services 65
Hitachi NAS Platform Network Administration Guide