Adding LDAP servers
To add an LDAP server
Procedure
1. Na
vigate to Network Configuration > NIS/LDAP Configuration.
2. Click add.
3. Modify the settings as described in the table below.
Field / Item Description
Server IP address or
Host name
Enter the IP address or Host name of the new LDAP server
Port This field specifies the standard port number to use for communication
with the LDAP serv
er. The default value is 389.
TLS Port This field specifies the secure port to use for communication with the
LDAP server. The default value is 636.
4. Click OK.
Note: An Administr
ator can query the LDAP server for information
about hosts configured into netgroups using the nis-is-host-in-
netgroup and nisnetgroups-for-host commands.
Deleting LDAP servers
To delete an LDAP server
Procedure
1. Na
vigate to Network Configuration > NIS/LDAP Configuration.
2. Select a server to delete.
3. Click delete.
Configuring name and directory services 67
Hitachi NAS Platform Network Administration Guide
To Next Page
Loading...
