-2-
MN1-5821 Rev. 4
1-4. Options
The following options are available for C25P probe.
• Biopsy Attachment
Table 1 provides biopsy attachments needed for performing a puncture. The attachments listed are manufactured by
Hitachi Medical Corporation and sold as the options of biopsy probe EUP-B715, but they are fully compatible with
C25P probe.
EZU-PA7B1-C is the attachment for Cool-tip
TM
(17G) or LeVeen
TM
SuperSlim.
Since each biopsy attachment is disposable, dispose it after one use.
Table 1 Biopsy Attachment for puncture
Product Name Gauge Size Quantity
EZU-PA7B1-1 12 - 13 G 10 pcs/pack
EZU-PA7B1-2 14 - 16 G 10 pcs/pack
EZU-PA7B1-3 17 - 19 G 10 pcs/pack
EZU-PA7B1-4 20 - 23 G 10 pcs/pack
EZU-PA7B1-C 17 G 10 pcs/pack
• Real Time Virtual Sonography (RVS)
Please use the option listed in Table 2 for performing RVS. Regarding how to attach/release the attachment, please
refer to the section 4.3.
Table 2 Option for RVS
Product Name Product No.
Magnetic Position Sensor Attachment RV-005
Warning
Use a needle which is applicable to the biopsy attachment.
Use of the needle which is not applicable to the biopsy attachment can result in puncture at unintended
parts and injury to the patient.
Use EZU-PA7B1-C if Radio Frequency Ablation (RFA) is performed with either Cool-tip
TM
(17G) or
LeVeen
TM
SuperSlim.
Sterilize the biopsy attachment prior to use.
The attachments listed in Table 1 are not sterilized, so they must be sterilized prior to use.
Do not reuse the biopsy attachment.
The attachments listed in Table 1 are disposable. Dispose after one use.
To Next Page
Loading...
Need help?
General
