39
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table below
can be performed. Select an item using the ▲/▼ cursor
buttons, and press the ► cursor button or the ENTER
button to execute the item. Then perform it according to
the following table.
Item Description
VOLUME
Using the ▲/▼ buttons adjusts the volume.
High
Low
SPEAKER
Using the ▲/▼ buttons turns on/off the built-in speaker.
TURN ON
TURN OFF
When TURN OFF is selected, the built-in speaker does not work.
AUDIO
The combination of a picture and audio input port can be arranged
in the menu.
The audio coming into the port selected in the (2) is output while an
image from the port chosen in the (1) is on screen.
(1) Choose a picture input port using the ▲/▼ buttons.
• Choose AUDIO OUT STANDBY, to select the audio output to the
AUDIO OUT port in the standby mode. The built-in speaker does
not work in the standby mode.
• While QUIT is selected, pressing the ◄ button returns to the
previous menu.
(2) Select one of the AUDIO IN ports using ◄/► buttons.
1 (AUDIO IN1)
2 (AUDIO IN2)
3 (AUDIO IN3)
• disables the audio output.
•
When is selected to VIDEO(NTSC), S-VIDEO(NTSC),
COMPONENT(480i@60), COMPUTER IN1(480i@60) and
COMPUTER IN2(480i@60), the C.C.(Closed Caption) is automatically
activated, if the C.C. is set to AUTO in the DISPLAY menu of the C.C.
menu and the signal from the input port supports the C.C. feature (
58).
QUIT
COMPUTER(IN)1
COMPUTER(IN)2
AUDIO OUT STANDBY
VIDEO
S-VIDEO
COMPONENT
(Y, CB/PB, CR/PR)
To Next Page
Loading...
Need help?
General