46
Item Description
MY BUTTON
This item is to assign one of the following functions to MY BUTTON
1 and 2 on the remote control (
6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button
first. Then using the ▲/▼ buttons sets one of the following functions
to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• COMPONENT: Sets port to COMPONENT (Y, C
B/PB, CR/PR)
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
•
INFORMATION: Displays the INPUT -INFORMATION-
(
49)
(
when
an input signal is found)
or nothing.
While the dialog is shown, pressing again the button closes the
dialog.
• MY MEMORY: Loads one of adjustment data stored (
30).
When more than one data are saved, the adjustment changes
every time the MY BUTTON is pushed.
When no data is saved in memory, the
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown
in the right appears.
If you want to keep the current adjustment, please press the
◄ button to quit. Otherwise loading a data will lose the current
adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE (
26).
• FILTER RESET: Displays the filter time reset confirmation dialog
(
45).
• AV MUTE: Turns the picture and audio on/off.
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item (
43) appear or disappear.
MY SOURCE
Using ▲/▼ buttons selects the picture input port to be selected with
pressing the MY SOURCE/DOC.CAMERA button on the remote control.
Select the picture input that is connected with a document camera.
COMPUTER (IN)1
COMPUTER (IN)2
VIDEO
S-VIDEO
COMPONENT
SERVICE
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or
the ENTER button to execute the item.
FAN SPEED
AUTO ADJUST
GHOST
FILTER MESSAGE
KEY LOCK
FOCUS LOCK
FACTORY RESET
LENS DOOR LOCK
I NFORMATION
REMOTE FREQ.
REMOTE RECEIV.
LENS DOOR CLOSE
LENS DOOR OPEN
OPTION menu
OPTION menu (continued)
(continued on next page)
To Next Page
Loading...
