EasyManuals Logo

Hitachi CP-WU8450 User Manual

Hitachi CP-WU8450
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
43
PICTURE menu
Item Description
COLOR TEMP
Using the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes
CUSTOM and then pressing the ► button
or the ENTER button displays a dialog
to aid you in adjusting the OFFSET and
GAIN of the selected mode.
OFFSET adjustments change the color intensity on the whole tones
of the test pattern. GAIN adjustments mainly affect color intensity on
the brighter tones of the test pattern.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as below.
No pattern
ð
Gray scale of 9 steps
Ramp
Gray scale of 15 steps
• Lines or other noise might appear on the screen
when this function is operated, but it is not a
malfunction.
COLOR
Using the ◄/► buttons adjusts the strength of whole color.
Weak
ó
Strong
• This item can be selected only for a video, s-video and component
video signal.
• For an HDMI
TM
signal, this item can also be selected if either (1) or
(2) applies.
(1) HDMI FORMAT item in the INPUT menu for selected port is set
to VIDEO.
(2)
HDMI FORMAT item in the INPUT menu for selected port is set to
AUTO, and the projector recognizes that it receives video signals.
TINT
Using the ◄/► buttons adjusts the tint.
Reddish
ó
Greenish
• This item can be selected only for a video, s-video and component
video signal.
• For an HDMI
TM
signal, this item can also be selected if either (1) or
(2) applies.
(1) HDMI FORMAT item in the INPUT menu for selected port is set
to VIDEO.
(2)
HDMI FORMAT item in the INPUT menu for selected port is set to
AUTO, and the projector recognizes that it receives video signals.
(continued on next page)
1 HIGH
1 CUSTOM
2 MID
2 CUSTOM 3 LOW
5 CUSTOM
4 CUSTOM
6 CUSTOM
3 CUSTOM
4 Hi-BRIGHT-1
5 Hi-BRIGHT-2
6 Hi-BRIGHT-3

Table of Contents

Other manuals for Hitachi CP-WU8450

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi CP-WU8450 and is the answer not in the manual?

Hitachi CP-WU8450 Specifications

General IconGeneral
Matrix size0.76 \
Matrix type3-panel (p-Si TFT active)
Native aspect ratio16:10
Projection distance1 - 38.3 m
Projection technologyLCD
Contrast ratio (typical)3000:1
Screen size compatibility30 - 600 \
Projector native resolutionWUXGA (1920x1200)
Audio input3
RS-232 ports1
Zoom capabilityYes
Focal length range- mm
Lamp typeUHP
Lamp power330 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source- h
3D-
Supported video modes1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
RMS rated power16 W
Number of built-in speakers2
DVI portNo
BNC input ports5
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Noise level- dB
CertificationUL/cUL, FCC Part15 class A, AS/NZS CISPR22 class A, CE, GOST-R
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Power sourceAC
AC input voltage100 - 240 V
Power consumption (standby)- W
Operating temperature (T-T)0 - 45 °C
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth396 mm
Width498 mm
Height135 mm
Weight8700 g

Related product manuals